Gag Order Denied in Oracle, SAP Trial

Bad news for SAP, Hewlett-Packard, it’s new CEO Léo Apotheker and anyone else tarred and feathered in Oracle CEO Larry Ellison’s recent fusillade of anti-SAP broadsides. A federal judge has denied a request for a gag order in the increasingly contentious legal battle between Oracle and SAP.

According to a court filing made public this morning (click on image above to enlarge), U.S. District Judge Phyllis Hamilton denied Oracle’s request for a three-day delay in the trial and ordered it to begin as scheduled on Monday, without the additional restrictions on extrajudicial communication SAP had requested.

Nonetheless, SAP–which, in a change of strategy, will not contest Oracle’s allegations that it contributed to acts of copyright infringement committed by its discontinued TomorrowNow unit–pronounced itself satisfied, saying in a statement, “The decision to narrow the scope of the trial and to start the trial on time will keep the focus on the core issues and eliminate the unnecessary sideshow. This will increase the chance of a faster resolution and we couldn’t be more pleased.”

So expect jury selection to occur on Monday, opening arguments on Tuesday and the rhetorical jousting we’ve seen to date to continue.

PREVIOUSLY:

• Ellison Taunts HP CEO a Second Time
• SAP to Ellison: Save the Drama for Your Mama
• Ellison to HP CEO: “Warrior, Come Out to Plaaeeay!
• SAP: Please Gag Oracle
• HP Scandal Sucks in New York Times Columnist Over Conflict of Interest
• Welch to HP Board: You Don’t Know Jack!
• Insiders Criticize Ellison For HP CEO Slam
• Was Apotheker HP’s First Choice of CEO?
• HP Names Ex-SAP Chief Apotheker as CEO

Another Wiif for Nintendo

Nintendo warned last month that its first-half results would be lousy, and this morning the company delivered on that promise, posting its first half-year loss in seven years.

For the six months to September 30, the Japanese gaming giant reported a $24.7 million loss as sales of hardware and software slipped. Nintendo sold 6.69 million DS units during the half, down significantly from the 11.7 million it sold during the same period last year. And it sold fewer Wiis as well–4.97 million, down from the 5.75 million it shipped last year. On the software side, things were equally dismal. DS software sales declined to 54.84 million units from 71.15 million units in 2009; Wii software sales fell to 65.21 million units from 76.21 million units in the same period a year earlier.

The beginnings of an ugly trend for Nintendo, which is fast losing momentum in a motion-enhanced gaming market in which its rivals are gaining it. With Sony’s PlayStation Move motion controller already at market and Microsoft’s Kinect for XBox 360 (Project Natal) headed there next month, it is becoming increasingly clear that the Wii–now about four years old–needs a full-on refresh.

Hello. Incredible. Jaw-Dropping. Really Great. Thank You.

Apple’s recent Back to the Mac condensed into 104 seconds of product adulation. Really great. Also: Incredible….

How to Add Limewire Songs to iPod

Many people download music from Limewire, but they can only listen them on computer. Put songs from Limewire to iPod touch is really difficult to many iPod users. Yes, you need to convert Limewire songs to iPod audio format by iPod Music Converter; actually, it is iPod mp3 converter or audio to mp3 converter, because iPod accepts mp3 audio files.

This article will share you how to add Limewire songs to iPod.

Part 1: For Windows users, how to add Limewire songs to iPod.
Step 1: Download Aiseesoft iPod Movie Converter
You need to download an iPod Music converter:



Step 2: Add Music
Click “Add File” and find your Limewire songs to load into iPod Music Converter
Step 3: Choose output format
You can choose output audio format from profile drop-down list—MP3
Step 4: Start to convert
Click “Start” button to begin your conversion.

Then you also need a tool to transfer your songs to your iPod.
Here I recommend you Aiseesoft iPod Transfer.



It is very easy to use:
Step 1: Connect iPod.
Plug your iPod to your computer via USB cable.
Step 2: Add songs
Click “PC to iPod” button to pick up the songs you have already converted and click “OK”. Now, you can enjoy your Limewire songs on your iPod at will.

Part 2: For Mac users, how to add Limewire songs to iPod
For Mac users, I recommend you Aiseesoft iPod Video Converter for Mac and Aiseesoft iPod Manager for Mac.


Step 1: Add file
Click “Add File” to load your music
Step 2: Choose output audio format
Click “profile” to choose your output audio format.
Step 3: Convert
Click “Start” button to begin your conversion.

To transfer converted songs to iPod, Mac users can use iPod Manager for Mac.


Step 1: Connect iPod
Plug your iPod to your computer
Step 2: Add music
1. Click “Music” (1)
2. Click “Mac to iPod” (2) and pick up the songs on your Mac you want to put on your iPod and click “Open” (3)
Few seconds later, the songs will be on your iPod.

Where to Download iPhone and Apple TV Firmware Files

Where to Download iPhone Firmware Files
Below you can find the direct links to the iPhone Firmware Files for every released firmware version. Please note that if you use Safari you must disable the auto unzip feature. It may be easier to just use Firefox!
iPhone Firmware 1.0.0: iPhone1,1_1.0_1A543a_Restore.ipsw
iPhone Firmware 1.0.1: iPhone1,1_1.0.1_1C25_Restore.ipsw.
iPhone Firmware 1.0.2: iPhone1,1_1.0.2_1C28_Restore.ipsw.
iPhone Firmware 1.1.1: iPhone1,1_1.1.1_3A109a_Restore.ipsw.
iPhone Firmware 1.1.2: iPhone1,1_1.1.2_3B48b_Restore.ipsw.
iPhone Firmware 1.1.3: iPhone1,1_1.1.3_4A93_Restore.ipsw.
iPhone Firmware 1.1.4: iPhone1,1_1.1.4_4A102_Restore.ipsw.
iPhone Firmware 2.0.0 (2G): iPhone1,1_2.0_5A347_Restore.ipsw.
iPhone Firmware 2.0.0 (3G): iPhone1,2_2.0_5A347_Restore.ipsw.
iPhone Firmware 2.0.1 (2G): iPhone1,1_2.0.1_5B108_Restore.ipsw.
iPhone Firmware 2.0.1 (3G): iPhone1,2_2.0.1_5B108_Restore.ipsw.
iPhone Firmware 2.0.2 (2G): iPhone1,1_2.0.2_5C1_Restore.ipsw.
iPhone Firmware 2.0.2 (3G): iPhone1,2_2.0.2_5C1_Restore.ipsw.
iPhone Firmware 2.1.0 (2G): iPhone1,1_2.1_5F136_Restore.ipsw.
iPhone Firmware 2.1.0 (3G): iPhone1,2_2.1_5F136_Restore.ipsw.
iPhone Firmware 2.2.0 (2G): iPhone1,1_2.2_5G77_Restore.ipsw.
iPhone Firmware 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw.

Where to Download Apple TV Firmware Files.
Below you can find the direct links to the Apple TV Firmware Files for every released firmware version.
Apple TV Firmware 1.0.0: OS-dot-DMG 1.0.dmg.
Apple TV Firmware 1.1.0: 2Z694-5248-45.dmg.
Apple TV Firmware 2.0.0: 2Z694-5274-109.dmg.
Apple TV Firmware 2.0.1: 2Z694-5387-25.dmg.
Apple TV Firmware 2.0.2: 2Z694-5428-3.dmg.
Apple TV Firmware 2.1.0: 2Z694-5485-1.dmg.
Apple TV Firmware 2.2.0: 2Z694-5499.dmg

Downgrade PSP to version1.5 using PSP battery

Lots of users downgrade their PSP to version 1.5 because they can upgrade their PSP to any version from 1.5. And if you upgrade your PSP to version 3.51, you can play any downloaded games and run any applications. Do you know that you can downgrade your PSP system to version 1.5 all by yourself by turning your PSP battery into a pandora's battery? All you need are an original PSP battery (with more than 50% charge) and a Memory Stick Pro Duo with 1GB memory or above.

I. Get ready (Reformat PSP memory stick)
Before you get started with the downgrade, you need to reformat your PSP memory stick. If you don't know how to reformat it, you can refer to the steps below:
1. Press the HOME button on the bottom left of your PSP.
2. Use the arrow keys to move to the Settings area, then move the up and down keys to go to System Settings.
3. Push the "X" button (or the "O" button, depending on which button is the "Enter" button of your PSP) and scroll to find the "Format Memory Stick" option. Push the "X" button again to select this option.
4. Your PSP will now confirm that you want to reformat the memory stick, choose yes and your PSP will be physically formatted in a few seconds.
To do the downgrade, you also need to download an application pack. After the downloading is finished, what you get will be a compressed application pack named "pandora", decompress it to the root directory of a hard disc, say Disc H. In this "pandora" folder, you can see four folders including mspformat, msinst, battery and installer, and a file named UPDATE.PBP.
Now you are ALL ready to turn your PSP battery to a Pandora's battery and use it to downgrade any PSP!
II.Turn your PSP battery into a padora's battery
Step 1: Logically reformat your PSP Connect your PSP to your computer. And your PSP will be recognized as a new hard disc, say K. Then click Start -> Run, input cmd in the popped up dialog box, and click OK to enter DOS system. Use the below commands one by one to run the mspformat file: Input "H:", and press the "Enter" Key on your keyboard. (Here H is the disc where the "panndora" folder is located) Input "cd pandora" and press the "Enter" Key on your keyboard. Input "cd mspformat" and press the "Enter" Key on your keyboard. Then input "mspformat.exe K" and press the "Enter" Key on your keyboard. (Here K is the name of the disc that your PSP is recognized on your computer.) After these commands, your PSP will be logically reformatted in a minute.



Step 2: Open the recognized PSP hard disc on your computer, create a new folder and name it "PSP", open this "PSP" folder, create a new folder and name it "game". Copy and paste the "installer" folder and the "battery" folder into the "game" folder. Then copy and paste the UPDATE.PBP file to the root directory of the PSP hard disc on your computer.
Step 3: On your PSP, switch to the Game option, press X or O (depending on which is the "Enter" key of your PSP). Go to "installer" and press X or O to run it.



In a few seconds, a file named "msipl.bin" will be created on the root directory of your PSP memory disc. And now, you should take out your memory disc and then put it back in, which seems to be useless but is a very necessary step.
Step 4: Connect to your PSP back to your computer. Then enter DOS system as mentioned in Step 1. Use the below commands one by one to run the mspformat file:
Input "H:", and press the "Enter" Key on your keyboard
Input "cd pandora" and press the "Enter" Key on your keyboard.
Input "cd minst" and press the "Enter" Key on your keyboard.
Then input "msinst.exe K K:\msipl.bin " and press the "Enter" Key on your keyboard. (Here K is the name of the disc that your PSP is recognized on your computer.)
When you see a popped up message asking if you are sure, click "Yes".
Step 5: Go back to your PSP, switch to the Game option, press X or O (depending on which is the "Enter" key of your PSP). Go to "battery" and press X or O to run it, press X or O to OK every popped up message to finish running the battery application.



Now, your pandora's battery has been created!

III. Use the created pandora's battery to downgrade your PSP
After you turn your batter to a PSP downgrade battery (pandora's battery), you can use it to downgrade your PSP by following the instructions below:
Take out your PSP Memory Stick and battery, then put back in your PSP Memory Stick first, and put your battery back in.Turn your PSP power on, when you see three options; select the Downgrade option, your PSP will be downgraded in a very short time and it will be automatically shut down afterwards.Turn your PSP on again, and you will see a blue screen. But no worries, you can just press the O key, and your PSP system is already version 1.5!
Note: The above process will turn your PSP battery to a pandora's battery that can be used for PSP downgrade. But the pandora's battery cannot be used to play PSP games, videos or music. And the process is not reversible. You will need to get an additional PSP battery for regular uses. However, you can use your pandora's battery to downgrade any PSP to version 1.5 or even repair you PSP.

Recommended Products For you:
DVD to PSP Converter for Windows
Aiseesoft DVD to PSP Converter for Windows is a professional application that is designed to convert DVD movie to PSP on PC.

PSP Movie Converter for Windows
Aiseesoft PSP Movie Converter is a professional video to PSP converter for Windows that can convert all sorts of video formats to PSP video on PC.

Adobe Chief Pours Cold Water on Microsoft Merger Talk

The prospect of Adobe being acquired by Microsoft may get tech bloggers and investors all worked up, but it’s not going to happen, says Adobe CEO Shantanu Narayen. The Redmond behemoth is a good buddy, said Narayen, but just one of many, and Adobe has no intention of getting hitched.

“You know, we value our independence, and we continue to think that we just have tremendous opportunities ahead of us as a company,” Narayen said in an interview with Fox Business Network today. “The macro trends that are driving our business, creating content, monetizing it, managing it, and delivering that value to our customers, that is what we’re focused on as a company. We have tremendous strategic partnerships not just with Microsoft. We have partnerships with Google and with Apple, as well as with all media companies who use our creative tools to produce content….

“We partner with Microsoft and the partnership with Microsoft is all about making sure that our creative applications, which are the best-selling creative applications in the world, work really well on the Windows platform. So, that is the nature of the partnership with Microsoft.”

Twitter Investor Spark Reloads With New Fund

Spark Capital, the venture capital fund best known as the guys who bet heavily on Twitter, has more money to play with. The company has raised a new $360 million fund, which happens to be the same size as its last one.

Apple to Host “Back to Mac” Special Event Next Week

Apple just announced another media event, this one scheduled for October 20–a week from today. It’s topic: The Mac and, judging from the invitation art, “Lion”–the next iteration of OS X.

“Come see what’s new for the Mac…including a sneak peek of the next major version of Mac OS X,” the invitation to the event reads.

The event’s to be held at Apple’s (AAPL) town hall and we’ll be covering it live at 10 am PT next Wednesday.

Here’s hoping for a new MacBook Air and new versions of iWork and iLife, which are due for an update.

How to convert FLV to iPod, iPhone, PSP, etc. on Mac OS X

What is FLV?
Flash Video (FLV) is the name of a file format used to deliver video over the Internet using Adobe Flash Player and has extension FLV. The most recent public release of Flash Player supports H.264 video and HE-AAC audio. Flash Video content may also be embedded within SWF files. Notable users of the Flash Video format include YouTube, Google Video, Yahoo! Video, Reuters.com and many other news providers.
How to play .FLV files on Mac?
If you want to play FLV (Flash Video) files on your Mac, you'll need to use a player that can handle FLV files. Here are two recommendations (both of them are FREE):
VLC Media Player
The VLC Media Player is a free, cross-platform media player that supports a large number of multimedia formats, without the need for additional codecs. It can handle FLV, WMV and VOB files to name a few.
Perian
Perian is a free, open source QuickTime component that adds native support for many popular media formats including FLV, MKV, AVI, DivX, 3ivX, FLV1, FSV1, Flash ADPCM and many more.
How to Convert Youtube FLV Videos to iPod, iPod touch, iPhone on Mac OS X?
As we know, most of the video files downloaded from these online video hosting sites are in the format of Flash Video (.flv). For whatever reasons, such as prefer to view and store the videos in mpeg format, or want to play the offline video clips in portable player such as PSP, iPod, and iPhone, or simply don’t like to view it with FLV Player, then there is a need to convert the .flv video format to another format such as .avi, .mov, .wmv and .mpg. So, how can you convert your flv video to all popular video formats easily and quickly? Please follow this step-by-step guide:
Step 1: Download FLV Video Converter for Mac, then run this program.
We recommend you Aiseesoft FLV Converter for Mac, which can convert all video files (including .flv format) from one format to another perfectly. Compared with other FLV converters, this Mac FLV video converter provides you with better output quality, more advanced functions and higher conversion speed(>300%), it also has more friendly and easy-to-use interface.
You can download free trial Version here: for Mac intel users, for Mac PowerPC users.
Then install and run this program.
Step 2: Load the FLV files you want to convert.
Click the "Add File" button to browse your computer hard disc and add the .flv video files you want to convert to the program.
Step 3: Choose the output format
After you added FLV files, you can select an output format for each video file and specify a directory on your computer to save the output files. This Mac FLV Converter supports comprehensive output video formats including AVI, MPEG, WMV, MP4, XviD, 3GP, etc. You can choose "*avi", "*mpg", etc. as the output format as you want. Apart form this, You can just select the format according to the device name.
for exapmle, you can select 'iPod Touch MPEG-4(*.mp4)' when you want to convert FLV to iPod touch on Mac.
Or you can select 'iPhone 3G Video MPEG-4(*.mp4)' when you want to convert FLV files to iPhone 3G on Mac. The default setting works well.
Step 4: Advanced settings(optional)
Of course, if you don't want to use the default video and audio encoding settings, just click the "Settings" button to customize these settings.



Step 5: Edit your flv files(optional)
Aiseesoft FLV Converter for Mac can help you set video brightness, contrast, saturation, Hue, volume, crop video, trim video and even merge multiple files into one single file before the conversion.
you can know more here: How to crop, trim video files on Mac OS X ?

Click the “Start”button to start conversion.

How to download flash videos from video sites for free?
You can download the flash video (.FLV files, the default video format that most video social sites are using) from online video host into your local hard disk. With some tricks, it’s now very easy to download the videos hosted and shared on online video sites such as YouTube and Google Video.
You can follow the 2 guides:
Guide : How to get videos from video sites for free?
For windows users, use Free YouTube Downloader

Download DVD PDF Podcast Limewire and YouTube video to iPod

This iPod Touch/Nano/Classic/Video guide includes the following ten parts:
1. How to watch PDF files and electronic books to iPod Touch/Nano/Classic/Video.
2. How to rip DVD and convert video to iPod Touch/Nano/Classic/Video.
3. How to watch iPod Video on large screen TV.
4. How to download youtube video to iPod Touch/Nano/Classic/Video for free.
5. How to download free podcast to iPod Touch/Nano/Classic/Video.
6. Where to download music and movie for iPod Touch/Nano/Classic/Video.
7. How to manage two iPods on one computer or transfer music between iPods.
8. How to copy and backup iPod files to computer.
9. How to hack iPod Nano to play games and music videos.
10. Why is that your iTunes converted videos has no sound

Part1. How to watch PDF or electronic book on iPod Touch/Nano/Classic/Video
iPod cannot directly display PDF files, you have to convert your PDF file or electronic book to *.txt format, and make sure the file size is smaller than 4KB, and then copy the *txt file to the “Note” folder of your iPod. Here are the detailed steps:
1. Enable your iPod as a portable hard drive, plug in your iPod to computer and run iTunes, in the summary tab, check the option named “enable iPod disk mode”
2. Download and install iGadget, it can convert and cut your files to 4kb .txt files. Here is the download link: http://www.youtubetoipod.biz/software/igadget.html.
3. Connect your iPod to computer, open “My Computer”, open the iPod drive (the new drive with your iPod name), and copy the txt file to the “Note” folder, done. Then you can read the text file on iPod note.

Part2. How to rip DVD and convert video to iPod Touch/Nano/Classic/Video
iPod can only play MP4 and H.264 video, but DVD movie is MPEG-2 video and CSS protected, so you need an application to rip DVD and convert video to MP4 video, and then sync it to iPod via iTunes. I strongly recommend Aiseesoft DVD to iPod Suite; it can rip protected DVD and convert limewire, youtube video, AVI, MPEG, WMV, MOV, FLV, XviD video to iPod. Also, I always use the iPod Movie Converter embedded in it to transfer video, and from my tests, it fully support all series of iPod including iPod Touch/Nano/Classic/Video. A really cool application.



Here is its official download link:
http://www.aiseesoft.com/dvd-to-ipod-suite.html
Here is the official step by step guide:
http://www.aiseesoft.com/article/dvd-to-ipod-converter.html
If you are Mac user, you can use this DVD Ripper for Mac to rip DVD to iPod:
http://www.aiseesoft.com/dvd-ripper-for-mac.html

Part3. How to watch iPod Video on large screen TV
Set up your iPod video options. On your iPod choose Videos -> Video Settings from the main menu. You will see three options: TV Out, TV Signal and Widescreen. Select the “TV Out” option.



Get your A/V cable. If you don't have an eighth-inch-to-RCA cable, you can pick one up on eBay for five or six bucks shipped. Search for "camcorder A/V cable." Remember, you want a three-plug yellow/red/white RCA connection at one end and a three-banded eighth-inch (3.5mm) A/V plug at the other.



1. Plug the red RCA plug into your TV's yellow RCA jack.
2. Plug the yellow RCA plug into your TV's white RCA jack.
3. Plug the white RCA plug into your TV's red RCA jack.
After making these connections, you're physically ready to begin playback.

Part4. How to download youtube video to iPod for free
iPod can play only MP4 and H.264 video, youtube video is stream video (.flv), so you need special software to capture the stream video to MP4 video, and then sync it to your iPod via iTunes. Here’re two ways to do that for free:
With free online flv converter such as http://vixy.net when you find your favorite youtube video, just copy the video URL (like this format http://www.youtube.com/watch?v=sdUUx5FdySs ) to the input box, choose the output format as iPod video, and then click start. When the conversion finished, you will get the MP4 video download link, just download and sync it to your iPod.



With Firefox + videodownloader, if you’re using Firefox browser, just install a plug-in named videodownloader, and then you will see a small icon in the bottom right, when you watch youtube video, double click it, and then you will get the flv download link. And then convert the flv video to MP4 video with Aiseesoft DVD to iPod Suite, done.

Free Trial: Download Aiseesoft DVD to iPod Suite

Next part: How to download podcast to iPod and copy music between iPods ?

How to upload videos to YouTube from iMovie

Making movies on your Mac is fun and easy, but how do you share them with the world? Many people choose to upload videos to YouTube from iMovie.
Part 1, How to upload videos to YouTube from iMovie HD
Part 2, How to upload videos to YouTube from iMovie

Part 1, How to upload videos to YouTube from iMovie HD
1. Make sure your video is the one you want to upload, then click the share button in the menu bar.
2. Select the QuickTime option.



3. Click on the menu for your compression options and select web.



4. Save your movie to the desktop or somewhere else. Find your movie and click it once then press apple+I to get its information. Make sure it is less than 100 megabytes or YouTube will not accept it.
5. Log in to YouTube and click on the “upload” button at the top of the page.
6. Enter the name, category, tags and any other information you want for your video.
7. Next click on “upload a video” once you have finished entering your videos information.
8. Click on the “Choose File” button and choose your video file from were you saved it. Make sure its your compressed QuickTime video and not the iMovie file.
9. Lastly click on the “Upload Video” button, it may take a few minutes for your video to upload and it may take several hours for it to show up on YouTube.
I also recommend CD quality. You can save the movie to CD-ROM and then you can upload movie from iMovie HD to YouTube!

Part 2, How to upload videos to YouTube from iMovie
1. Make sure your video is the one you want to share, then click the share button in the menu bar and select YouTube.
2. Choose your YouTube account or create a new one
3. Confirm your sign in.
4. Select the category, name, description, and tags for your video.
5. Select your publish size and click Next
6. Now click the publish button.
7. Your video will be ready to watch on YouTube in 2-120 minutes.

Google has released basic software called Vidnik which is the quickest, simplest way to make movies using the built - in camera on your Macintosh and upload those movies to your YouTube account. You must first sign up for a free YouTube membership to upload videos.
Learn more: How to upload videos to YouTube easily and quickly on Mac?

No BlackBerry Blackout in UAE

Research in Motion’s BlackBerry service won’t be going dark in The United Arab Emirates on Monday. This morning the the UAE’s Telecommunications Regulatory Authority (TRA), which had threatened to ban the service over security concerns, backed off that threat after reaching some sort of deal with RIM. “[The TRA] has confirmed that Blackberry services are now compliant with the UAE’s telecommunications regulatory framework,” the agency said in a statement.

Just how, exactly, RIM (RIMM) reached compliance isn’t exactly clear. The company refuses to discuss its deal with the UAE, claiming its terms are confidential. But according to the TRA, it’s the result of “positive engagement and collaboration” with the company, so my guess is it got what it wanted: An arrangement that will give it access to BlackBerry data.

Meanwhile, RIM’s services will continue uninterrupted as it prepares for the UAE launch of the Torch and Curve model in the weeks ahead.

Exclusive: New MSNBC.com-BermanBraun Online Political Site BLTWY Launches

While it seems to be a stealth launch, the new online political site for MSNBC.com, created by Hollywood production firm BermanBraun, is now up and running.

Called BLTWY–as in “Beltway,” presumably for the road that rings the nation’s capital–the striking rich-media content site is now live. (You can see it above.)

BLTWY seems to follow along the sweeping horizontal wall and extensive use of larger photos and videos that characterize BermanBraun’s popular Wonderwall celebrity site.

In May, BermanBraun and MSNBC announced the collaboration in a blog post, noting:

“Politicians have now become part of popular culture, and de-facto celebrities, attracting considerable media attention. BermanBraun and the Msnbc Digital Network announced a partnership to create an original destination site which will go beyond policy and polls to explore the celebrity side of politics…It will take you inside the beltway to explore the lives of politicians as celebrities, giving politics the Wonderwall treatment.”

BLTWY is definitely aimed at meshing celebrity and politics and has a lot of interactive elements, such as polls and Facebook Connect.

In fact, the main feature at the moment is a diva depiction of the Supreme Court.

The slick site also appears to be developed in HTML5, rather than using Adobe (ADBE) Flash technology and fits to the entire screen with the homepage remaining in a persistent manner.

BermanBraun has already created several sites for Microsoft (MSFT) and its online properties. Wonderwall debuted in 2009 on its MSN portal, where its women-focused Glo also resides.

HP’s Own CEO Candidates Unlikely to Seek Freedom After Passover

Hewlett-Packard’s decision to name Léo Apotheker as its new CEO hasn’t gone over particularly well with investors, who dragged the company’s stock into the mud this morning. At $40.50, HP shares are down 3.76 percent as I write this. So how is it going over internally, particularly with those execs who’d been internal candidates for the job?

This is, after all, the third consecutive time that HP has gone outside to pick a leader, previously hiring Carly Fiorina from Lucent and Mark Hurd from NCR (NCR). And before deciding on Apotheker, the company was known to be considering three CEO-caliber candidates from its own roster–Todd Bradley, executive VP of HP’s personal systems group; Ann Livermore, vice president of HP’s $54 billion Enterprise Business; and Dave Donatelli, executive VP of Enterprise Servers and the guy who helped lead HP’s successful bidding war for 3Par. Donatelli is a relatively new hire and may not have had strong CEO aspirations (yet), but Livermore has been passed over the the top job three times now, and sources at HP say Bradley had been “hopeful” about becoming the company’s next CEO.

Has Apotheker’s appointment made these three execs flight risks?

J.P. Morgan analyst Mark Moskowitz doesn’t think so. “Livermore has been an HP-lifer and credited with integrating the enterprise services and hardware practices,” he wrote in a note to clients today. “We think [she] will want to stick around as the enterprise solutions mantra continues. Meanwhile, Bradley has been instrumental in augmenting the personal systems business, and we think he will be focused on next leveraging the Palm acquisition into a potential disruptive force in mobile communications environments. Lastly, Dave Donatelli is still relatively new to HP, and we expect him to be busy integrating the 3Par and 3Com assets, both deals of which he was the chief architect, based on our conversations with industry contacts.”

Makes sense, right? Livermore is a veteran and her hopes for the CEO spot couldn’t have been too high after being passed over for it twice. Donatelli has been at the company only a little over a year, reports to Livermore and is still making his mark at the company. And Bradley, though surely disappointed, has HP’s developing webOS-based device business in which to take solace. That said, if there is a flight risk among these three, he seems the most likely. Jokingly introduced as the CEO of HP at the TechCrunch Disrupt conference earlier this week, Bradley quipped, “Not yet.” And it seems clear he had his eye on the job. But will losing it to Apotheker inspire him to hop trains? Tough to say. In any event, were he to threaten to leave, HP (HPQ) would surely do all that it could to keep him (maybe it already is). Losing him at this point would be terrible for the company’s consumer business.

How to convert MTS/M2TS video

MTS or M2TS format is the equivalent of h.264 or MPEG-4 AVC. It is a fairly new High Definition codec that provides greater compression than the regular MP4 and others. Those two High Definition format always be used on HD Camcorder, such as Sony, Canon or Panasonic.

As they are HD video, most of our video editor such as windows movie maker can not edit it directly. And also you can not upload it to youtube.com and share with your friends.

So you need to convert them into normal video format, such as wmv, mp4, avi and so on.

Here I know a really powerful MTS Converter and M2TS Converter
And the process of operation is really easy and fast.

Part 1: How to convert MTS video
Step 1: Load Video
Click "Add File" to load the video that you want.

Step 2: Choose Your Output Profile and Settings
From "Profile" drop-down list you can choose your output profile according to your need.
For example, if you have a iPod and you want to convert video for it, you need to choose "iPod" from the profile list and then it also provides the second chance to specify your iPod generation.
You can also click "setting" adjust the settings of your output video, such as "video/audio encoder", "Video/audio Bitrate", "Channels", "Resolution" and so on..

Step 3: Conversion
After you have done all the steps above you can click "Start" button to start your conversion.

Part 2: How to convert M2TS video

Step 1: Add File
Load your M2TS video.

Step 2: Choose Profile and Settings
Select your output profile according your need and adjust the settings of your output video if you like.
(the default setting works well)

Step 3: Start Conversion
Click "Start" to begin your conversion.

Here I also recommend you a really nice HD Video Converter, which can convert HD TS, HD MTS, HD M2TS, HD MPEG, HD WMV, HD MPG, HD MP4, QuickTime HD MOV, HD H.264, HD RM video, etc

Some problems the new iPod touch users may meet

1. How to change iTunes to recognize the new iPod touch
Some New iPod users may meet the situation that your iTunes can not detect your new iPod nano, iPod touch, or iPod Classic. It should recognize it immediately. If it doesn't, download the latest version of iTunes. The problem will be solved:
1) Re-launch iTunes, with and without your iPod plugged in.
2) With iTunes open, reset your iPod Touch
(here:http://docs.info.apple.com/article.html?artnum=305743 ) Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds until the Apple logo appears.
3) Restart your computer leaving your iPod touch plugged in
Note: If you uninstall iTunes from a computer, it will be uninstalled for all the users. But it will show up again for all users once you re-install it again. Before uninstalling each user should backup his/her playlists so they can bring them back when the re-install is completed.No music for any of the users will be removed by iTunes. It will remain intact where it is saved.

2．'I can't turn on my iPod'
I have a 1st or 2nd generation video iPod (80 gig).
My computer is windows 2000 so I downloaded the windows 2000 iTunes. So I decided to update my iPod, it was updated and it was fine. It ran out of power. Then it won't turn on? I tried to charge it but it just keeps saying please wait such and such. I left it there for like 2 hours already, and still it didn't charge up... Is the problem because I updated my iPod or something else? And when I opened my computer, iTunes asked me if I can format my iPod into windows. I put yes, it didnt do anything.So I have to problems, its not charging.. and its not turning on.
by Ashley :'My friend had this same problem a few years ago.She just left it plugged in to her computer for a few days, waited it out... eventually the problem fixed itself on its own. I'd say just wait it out for a day or two, and if it's still having problems, take it in to your nearest Circuit City or something.”
by Karat :'its the most popular iPod problem. If you drain the battery fully, you're screwed. Basically the battery is down, but the darn thing wont charge unless you connect it to the usb and the usb wont detect it unless it has charge! So please take it to your nearest apple outlet.”
by Kylla :'The one thing you never want to do with an iPod is let it run out of power, not good for it at all :P I've done it a few times but try to avoid it. What you want to do is hold the menu button and the play/pause button at the SAME time and just wait for it. It should restart it. Thats how my iPod works, yours could be different so experiment with the buttons. Try holding perhaps the center button and the play/pause button? or center button and the menu button? Try to see which two buttons will restart it, its bound to work. But hold BOTH of them down at the SAME time with one hand..and be patient, wait for about 10-15 seconds or so. :)”

3. Why does my 30G iPod video always die quickly?
Even when I am just listening to music. It shuts off after about 45 min. And that is a problem because I am going on a plane trip soon and I plan to watch a movie on my iPod, but movies eat your batttery. Does this happen to anyone else???? How can I make the battery life last longer. btw, it is only like a year old.
by dipin :'In an iPod the battery life is different.
it doesnt depend on how old it is rather it depends on how many times you have charged and discharged it.
for increasing the battery life you should fully charge the battery every time you are charging it . and secondly you should never let it discharge completely . put it on charging just before it shows the red signal and disconnect it only when it is fully charged.
sorry to say but now u'll have to get the battery replaced from apple reseller if you want to watch complete movie the battery life as said by apple is 500 complete cycles of charging and discharging”
by sugadoll :'The same thing happened to me. The problem is that your computer can't detect a completly dead iPod, but you need the computer to charge it so your screwed. j/k I solved it by pluging it into my ihome dock that plugs into the wall. So if you have a wall iPod dock or a car one you can charge it enough so that the computer can detect it. Problem solved.

Recommended Products For you:
DVD Ripper for Mac
Convert DVD to any video or audio formats on Mac OS X. Aiseesoft DVD Ripper for Mac is a professional Mac DVD ripper software.
Video Converter for Mac
Convert all video formats from one to another on Mac OS X. Aiseesoft Video Converter for Mac is a specially designed Mac video converter.